View 8261SHAV2PE223_1203697.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
A Pushbutton
Features/Benefits * Long travel * Available with LED * Long life contact design * Epoxy terminial seal
compatabile with bottom wash cleaning * RoHS compliant models available Specifications
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC or 28 V DC; 3 AMPS @ 250 V AC. See page A-57 for additional ratings. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 20 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30C to 65C SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
NOTE: Any models supplied with P, R, S, Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
Typical Applications * Instrumentation * Computers and peripherals * Telecommunications and
networking equipment
Models Available
Materials
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP), flame retardant (UL 94V-0). PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated. CAP & FRAME: Nylon, black standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: Q contact material: Coin silver, silver plated. See page A-57 for additional contact materials. CENTER CONTACT & ALL TERMINALS: Q contact material: Copper alloy, silver plated. See page A-57 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to soldering and cleaning in Technical Data Chapter. HARDWARE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-51 thru A-59. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all "bottom-wash" PCB cleaning methods.
Switch Function 8161 SPDT On-On 8168 SPDT On-Mom. 8261 DPDT On-On Actuator or Plunger S .710" high plunger with .375" dia. cap J80 Snap-in J81 Snap-in with frame J82 Snap-in with frame for LED J86 Snap-in with frame & LED L .740" high plunger with .395" dia. cap L1 .740" high plunger with .590" dia. cap S1 .615" high plunger with .200" dia. cap S2 .710" high plunger with .310" dia. cap
Bushing H .300" high, flat, hi torque H9 .300" high, flat, hi torque NONE No bushing choice required Y3 7.6mm, keyway Terminations A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole V3 .460" high, V-bracket V4 .630" high, V-bracket V6 .460" high, V-bracket V21 .555" high, snap-in V-bracket V31 .460" high, snap-in V-bracket W .750" long, wire wrap Z3 Quick connect
Contact Material B Gold K Gold, tin-lead P Gold, matte-tin Q Silver M Silver, tin-lead S Silver, matte-tin G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color 2 Black 1 White 3 Red 4 Orange 5 Yellow 9 Gray
Frame Color 2 Black LED Color 3 Red NONE Models without LED
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-50
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
SWITCH FUNCTION
SWITCH FUNCTION POS. 1 POS. 2 CONNECTED TERMINALS POS. 1 POS. 2
A Pushbutton
NO. POLES
MODEL NO.
C&K marking this side
C&K marking this side
SCHEMATIC
SP
8161 8168
ON ON
ON MOM.
2-3 2-3
2-1 2-1 SPDT
SPDT
Part number shown: 8161SHZQE
Terminal Nos. For Reference Only
DP
8261
ON
ON
2-3,5-6
2-1,5-4 DPDT
DPDT
Part number shown: 8261SHZQE MOM. = Momentary All models
Terminal Nos. For Reference Only with all options when ordered with G, L, M or Q contact material.
CAP COLOR
ACTUATOR--SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J80
SNAP-IN
PANEL MOUNTING
OPTION CODE
* CAP COLOR BLACK WHITE RED ORANGE YELLOW GRAY *Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,41/2,18) thick panels.
2 1 3 4 5 9
Cap Finish: matte. Other colors available, consult Customer Service Center. Available with C, W, Z or Z3 terminations. NOTE: Caps & frames available separately, see pages A-58 and A-59.
J81
SNAP-IN WITH BLACK FRAME
PANEL MOUNTING
* *Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,41/2,18) thick panels.
Third Angle Projection
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-51
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
CAP COLOR
A Pushbutton
J82
ACTUATOR--SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
SNAP-IN WITH BLACK FRAME FOR LED
Available with C, W, Z or Z3 terminations.
LED not included. For LED information, see page A-59. NOTE: Caps & frames available separately, see pages A-58 and A-59. Other colors available, consult Customer Service Center.
OPTION CODE
CAP COLOR BLACK WHITE RED ORANGE YELLOW GRAY
2 1 3 4 5 9
CAP COLOR
LED COLOR
ACTUATOR--SNAP-IN FRONT MOUNT
J86
SNAP-IN WITH BLACK FRAME AND LED
ACTUATOR OR PLUNGER
PANEL MOUNTING
*
8161J86ZQE223 SPDT
Available with C, W, Z or Z3 terminations and SPDT models only. OPTION CODE OPTION CODE
* Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thick panels.
NOTE: Caps & frames available separately, see pages A-58 and A-59. Other colors available, consult Customer Service Center.
CAP COLOR BLACK WHITE RED ORANGE YELLOW GRAY
LED COLOR RED
2 1 3 4 5 9
3
For LED information, see page A-59.
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-52
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
CAP COLOR
PLUNGER
ACTUATOR OR PLUNGER
A Pushbutton
PLUNGER WITH CAP P/N 8018
S
PLUNGER WITH CAP P/N 7527
S1
PLUNGER WITH CAP P/N 7089
S2
L
PLUNGER WITH CAP P/N 8941
L1
PLUNGER WITH CAP P/N 8940
OPTION CODE
CAP COLOR BLACK WHITE RED ORANGE YELLOW GRAY
2 1 3 4 5 9
Cap Finish: gloss. Cap supplied not installed. Other colors available, consult Customer Service Center. NOTE: When selecting plunger and cap option, bushing selection must also be made, see below.
BUSHING
H H9
.300" HIGH THREADED, FLAT .300" HIGH UNTHREADED, FLAT
NONE
NO BUSHING CHOICE REQUIRED (JXX ACTUATORS)
Y3
7.6mm THREADED, KEYWAY
1/440 UNS-2A
H bushing standard with C, W, Z or Z3 terminations. H9 bushing standard with A, A3, AV2, AV3, or V3-V31 terminations. Withstands 12 in./lbs. of torque with no distortion.
Withstands 12 in./lbs. of torque with no distortion.
NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected.
NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles and finishes available, see section "Technical Data and Additional Hardware".
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-53
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
A Pushbutton
C
PC THRU-HOLE PC MOUNTING
TERMINATIONS
Z
SOLDER LUG
SPDT and DPDT
SPDT and DPDT
Not available with P, S, R, K, L, or M contact material.
Z3
QUICK CONNECT
W
WIRE WRAP
.750 (19,05)
SPDT and DPDT
Not available with P, S, R, K, L, or M contact material. Mating quick connector available; order part number 530100000, page A-59.
SPDT and DPDT
A
HOLE
RIGHT ANGLE, PC THRU-
.130 (3,3)
.138 (3,51)
8161SH9ABE2 SPDT
SECTION A-A
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
Not available with I seal. Terminal bend radii and lead-in manufacturing option.
NOTE: PC pattern must clear switch support leg. Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-54
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
A Pushbutton
8261SH9ABE2 DPDT
SECTION A-A
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE PC MOUNTING
Not available with I seal. Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8161SH9AV2BE2 SPDT
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING
Not available with I seal. Terminal bend radii and lead-in manufacturing option. Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-55
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
A Pushbutton
AV2
TERMINATIONS
VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8261SH9AV2BE2 DPDT
SECTION A-A
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH
PC MOUNTING
Not available with I seal. Terminal bend radii and lead-in manufacturing option.
V6 V21
VERTICAL MOUNT, V-BRACKET VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION CODE
DIM `A' .555 (14,10) .460 (11,68)
8161SH9__BE2 SPDT
Not available with I seal.
V21 V6
V6 V21
VERTICAL MOUNT, V-BRACKET PC MOUNTING VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION CODE
DIM `A' .555 (14,10) .460 (11,68)
8261SH9__BE2 DPDT
Not available with I seal.
V21 V6
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-56
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
V3, V4 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
A Pushbutton
PC MOUNTING
8161SH9__BE2 SPDT
OPTION CODE
DIM `A' .460 (11,68) .630 (16,00)
V3, V31
Not available with I seal.
V4
V3, V4 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
8261SH9__BE2 DPDT
SNAP-IN OPTION CODE DIM `A' .460 (11,68) .630 (16,00)
V3, V31
Not available with I seal.
V4
CONTACT MATERIAL
OPTION CODE RoHS COMPLIANT * YES NO YES YES NO YES YES NO YES RoHS COMPATIBLE * YES YES YES YES YES YES YES YES YES GOLD OVER SILVER 2,3 SILVER
4,5
CONTACT MATERIAL
TERMINAL PLATING GOLD 1
RATINGS
B K P Q M S G L R
GOLD 1
TIN-LEAD 6 MATTE-TIN 7 SILVER 5 TIN-LEAD 6 MATTE-TIN 7 GOLD 3 TIN-LEAD 6 MATTE-TIN 7
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
POWER
6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
0.4 VA MAX @ 20 V AC OR DC MAX. OR LOW LEVEL/DRY CIRCUIT OR POWER 6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 2 3 4 5 6 7
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, with gold plate over nickel plate. CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, silver plated. CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with P, S, R,Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models contact material. with all options when ordered with S, R, G, L, M or Q
B contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P, S, R, K, L & M contact materials not available with Z & Z3 terminations. Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-57
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
A Pushbutton
E
EPOXY SEAL
SEAL
I
EPOXY POTTED BASE
NOTE: Available with C, W, Z, Z3 terminations only.
AVAILABLE HARDWARE
Cap .120 (3,05) .200 DIA. (5,08 ) Cap Cap
.155 (3,94) PART NO. PART NO. WHITE BLACK RED ORANGE YELLOW GRAY PART NO. WHITE BLACK RED ORANGE YELLOW GRAY
708901000 708902000 708903000 708904000 708905000 708909000
Material: Nylon Finish: Gloss
752701000 752702000 752703000 752704000 752705000 752709000
Material: Nylon Finish: Gloss
801801000 801802000 801803000 801804000 801805000 801809000
Material: Nylon Finish: Gloss
WHITE BLACK RED ORANGE YELLOW GRAY
Cap, Snap-fitting plunger
Cap, Snap-fitting plunger
Cap, J80, J81 & J82 options only
PART NO.
PART NO. WHITE BLACK RED ORANGE YELLOW GRAY
PART NO. WHITE BLACK RED ORANGE YELLOW GRAY
PART NO. WHITE BLACK RED ORANGE YELLOW GRAY
894001000 894002000 894003000 894004000 894005000 894009000
Material: Nylon Finish: Gloss
894101000 894102000 894103000 894104000 894105000 894109000
Material: Nylon Finish: Gloss Frame
484601000 484602000 484603000 484604000 484605000 484609000
Material: Nylon Finish: Gloss
798201000 798202263 798203000 798204000 798205000 798209000
Material: Nylon Finish: Matte
WHITE BLACK RED ORANGE YELLOW GRAY
Cap, J86 & J96 options only
Frame
PART NO.
PART NO.
459701000 459702000 459703000 459704000 459705000 459709000
Material: Nylon Finish: Gloss
476801000 476802000 476803000 476804000 476805000 476809000
Material: Nylon Finish: Matte
WHITE BLACK RED ORANGE YELLOW GRAY
PART NO.
PART NO.
615602263 BLACK
Material: Nylon Finish: Matte
613302263 BLACK
Material: Nylon Finish: Matte
NOTE: Additional nuts, locking rings and lockwashers available separately, see section "Technical Data and Additional Hardware". Other cap & frame colors available, consult Customer Service Center.
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-58
www.ittcannon.com
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
AVAILABLE HARDWARE
Fits Z3 Termination female connector
A Pushbutton
PART NO.
530100000
Available in loose pieces.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
.047" (1,19) PANEL THK. PART NO.
.062" (1,57) PANEL THK. PART NO.
.090" (2,29) PANEL THK. PART NO.
.125" (3,18) PANEL THK. PART NO.
432502263
432602263
432702263
432802263 BLACK
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included.
PANEL INSERT WITH HOLE FOR LED PART NO.
BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.
894902000
476602000
BLACK
Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
SWITCHES WITH LED SUPPLIED: J86 OPTION: Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable. The following specifications apply:
TYP. FORWARD VOLTAGE TYP. FORWARD CURRENT 20 mA 2.1 V 10 mA 20 mA 2.5 V MAX RATINGS AT 25C AMBIENT TEMPERATURE FORWARD VOLTAGE CONTINUOUS FORWARD CURRENT 50 mA 30 mA 50 mA POWER DISSIPATION 125 mW 75 mW 125 mW .230 DIA. (5,84) .030 (0,76) .340 (8,64) Suggested LED for J82 & J84 options. Dimensions for reference only. .750 (19,05) Flat denotes cathode. .025 SQ. TYP. (0,63)
OPTION CODE 6 3 5
COLOR Green Red* Yellow
TYP. INTENSITY 1.0 mcd 0.5 mcd 4.0 mcd
.200 DIA. (5,08)
Process Information: Soldering to LED leads must be completed within 5 seconds at 500F (260C) maximum. Caution: Circuit elements must limit forward current of LED to 50mA max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center. LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and is wired externally.
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A-59
www.ittcannon.com

▲Up To Search▲

Price & Availability of 8261SHAV2PE223

	To Download 8261SHAV2PE223 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .